: OrCAD 16.6 includes PSpice for advanced circuit analysis, including transient, AC, and DC sweeps.
A BOM is a list of all components needed to build your board. A custom BOM can include critical information like manufacturer part numbers and PCB footprints. orcad 16.6 tutorial
Your manufacturer cannot open your raw .brd design file. You must generate standardized Gerber files (RS-274X) and NC Drill files. Defining Gerber Art Film Control Go to . : OrCAD 16
| Analysis | Use case | |----------|----------| | Bias Point | DC operating point | | DC Sweep | Transfer characteristic | | AC Sweep | Frequency response | | Transient | Time-domain waveform | Your manufacturer cannot open your raw
I can provide step-by-step instructions or troubleshooting configurations for those exact scenarios. Share public link
You will see a schematic page titled "PAGE1" under the Design Resources folder. Double-click it to open the canvas.
If the libraries are empty, click the (configured as a green plus icon). Browse to the OrCAD installation directory (usually C:\Cadence\SPB_16.6\tools\capture\library ) and add core libraries like Discrete , Amplifier , and Connector . Search for your component (e.g., RESISTOR , CAPACITOR ).