Coordinates the 3D auto-alignment system, driving the X, Y, and Z-axis stepping motors. 2. Advanced Diagnostic Mode Entry
Use the joystick to center the alignment target perfectly on the test eye. topcon kr8900 service manual exclusive
When the KR-8900 encounters an internal fault, it displays specific error codes on the LCD screen or flashes status LEDs on the main PCB. Error Code / Symptom Root Cause Corrective Action Fixation LED burnout or target motor stall. Coordinates the 3D auto-alignment system, driving the X,
The measurement window and the patient-side objective lens are susceptible to dust and oils (mascara, eyelashes). When the KR-8900 encounters an internal fault, it
Safety Warning: Never look directly into the measurement path with naked eyes while the IR LEDs are active. Required Tools
The main processing board. If self-checks of RAM or FROM fail, the Control PCB typically requires replacement.