Press the (or Set ) button to save and move to the month selection.
Use only. Substitute cartridges may damage the hammer mechanism. iwata 2crh bundy clock manual
Iwata guarantees the 2CRH Bundy Clock against defects in materials and workmanship for from purchase. This warranty excludes ribbons, consumables, abuse, and unauthorized repairs. Press the (or Set ) button to save
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | | Worn ribbon or dry ink. | Replace the ink ribbon. | | Print is smudged | Ribbon is loose or misaligned. | Re-seat the ribbon and ensure it is tight. | | Time is losing minutes | Internal motor issue or low power. | Check power connection; clean internal gears. | | Date not advancing | Type wheels are locked. | Ensure the date lock lever is in the "Run" position. | | Card jams | Debris in card slot. | Use compressed air to clean the card path. | Iwata guarantees the 2CRH Bundy Clock against defects
To program your Iwata 2CRH, you must remove the top cover using the provided key to access the control panel switch. 1. Entering Program Mode Unlock and remove the top casing.