Gx6605s — S18069 V1 Dump File

Re-solder the chip back onto the receiver board (or remove the clip) and power on the box. Troubleshooting Common Errors 1. GXDownloader gets stuck on "Synchronizing..."

Click and select your valid gx6605s_s18069_v1_dump.bin file. Click Start . Turn on the power switch of the satellite receiver. gx6605s s18069 v1 dump file

Open your satellite receiver box and locate the 8-pin chip near the GX6605S main processor. Re-solder the chip back onto the receiver board

Power on the receiver while holding the button or OK button on the front panel. RS232 Serial Tool: Use a GX6605S Downloader/Loader Tool . Click Start

: The front panel shows a solid red power LED but nothing else.

: Plug the power adapter into the satellite receiver. The progress bar in the software should immediately turn red, then green as it formats and writes the data.

Choose the correct bootloader file included with the downloader software. Select Mode: Set the mode operation to SerialDown .