Zclever Security Camera Manual Link

Look for a small pinhole reset button on the camera or DVR unit. Hold Reset:

If prompted, scan the QR code printed on the camera body or base sticker. Enter your local Wi-Fi network name (SSID) and password. zclever security camera manual

Are you trying to set up or just local monitoring ? Look for a small pinhole reset button on

If you forget your camera password or change your home router, you must perform a hard factory reset. Locate the reset button on the camera wire bundle or under the micro-SD card cover. While the unit is powered on, . Release the button when you hear a voice prompt or see the infrared lights flash. The camera will reboot into its original factory default state, allowing you to begin the pairing process anew. Are you trying to set up or just local monitoring

Check the sticker on the camera body or the side of the box for a specific QR code to download the correct app.

⚠️ : POE cameras cannot be used alone or connected to other NVRs; they must be connected to Zclever's NVR for monitoring or viewing.

: Use an Ethernet cable to connect the LAN port on the back of the NVR to your internet router. This is required for remote viewing on your phone. 2. Mobile App Setup (Remote Viewing)