Solar Camera Yn88-wifi Manual Link Jun 2026

Wipe the gold contacts of the card with a clean, dry microfiber cloth. Excessive False Alarms Reduce the PIR detection sensitivity in the app.

Full HD 1080p (2.0 Megapixels) using a Huawei HiSilicon Hi3518EV200 chip.

Plug a standard Micro-USB or USB-C cable (included in most packages) into the charging port. Connect the cable to a 5V/2A power adapter. solar camera yn88-wifi manual

Houses high-capacity lithium-ion batteries (typically 18650 or 21700 cells, depending on the exact production batch) acting as the primary power reservoir.

The camera interfaces with your smartphone via a dedicated mobile app (typically , Tuya Smart , or i-Cam+ depending on the specific firmware version distributed with your YN88 variant. Check your box QR code to verify). The configuration process follows standard P2P Wi-Fi protocols. Wipe the gold contacts of the card with

Check the battery status in the app. Extended cloudy weather may require you to take the camera down and manually recharge it via USB.

The YN88’s PIR sensor (RE200B or similar) detects changes in IR radiation. Sensitivity is set via firmware: Plug a standard Micro-USB or USB-C cable (included

The Solar Camera YN88-Wifi comes with the following components: