| Error Symptom | Possible Cause & Solution | | :--- | :--- | | | This often points to a communication error with the target drive (e.g., USB hard drive) or a Windows system file issue. Check the USB cable and port. Run chkdsk (Check Disk) on the source drive. | | "HDD0 is not accessible" or recognition problems | The software might not detect the internal hard drive. This is common with modern RAID controllers or NVMe SSDs. Boot from the USB stick and load the correct storage drivers via "Drivers and Utilities" in the boot menu. | | Confusion about automated network backups | The tool can save images to a network drive, but it needs a connection. A user from Siemens clarified: "The Image & Partition Creator cannot be automated from the running system to save on a network drive. The program must be started manually." | | Windows boot error after cloning to new IPC | This happens due to mismatched hardware drivers (e.g., chipset, SATA controller). Use the "P2P Adjust OS" function in the software on the target drive before booting. This injects the standard Windows drivers and makes the OS hardware-independent. |
https://support.industry.siemens.com/cs/ww/en/view/109763375 simatic ipc image amp partition creator v36 download hot
Insert the bootable USB drive into an empty port on your SIMATIC IPC. Power on or restart the IPC. | Error Symptom | Possible Cause & Solution