If your Try3.5PLMA just came out of the box, follow these steps to assemble it correctly: Step 1: Unpack and Unfold the Handles Carefully lift the mower out of the carton.
Run the engine until it stops from lack of fuel, or use a siphon pump to empty the tank. Stale gas forms varnish that clogs internal carburetor jets. try3.5plma lawn mower manual
:
Reinstall the blade with the curved trailing edges pointing upward toward the deck. Torque the bolt tightly to the manufacturer's specified tension (typically 35–45 ft-lbs). 6. Troubleshooting Guide Possible Cause Corrective Action Safety bail released Pull bail firmly against handlebar. Out of fuel Fill tank with fresh unleaded gasoline. Old or stale fuel Drain tank; fill with fresh fuel and fuel stabilizer. Spark plug disconnected Securely attach the wire boot to the spark plug. Dirty air filter Clean or replace the filter element. Engine flooded If your Try3