Motorola Gm360 Programming Software Jun 2026
The GM360 utilizes the microphone jack on the front panel for programming data input/output.
The GM360 is an EMEA (Europe, Middle East, Africa) market radio. Trying to read it with an American (AAM) or Asian (AZM) version of the Professional Series CPS will result in an error. Ensure you are using the correct regional software variants. If you are setting this up for the first time, tell me: What operating system is your computer running? Do you already have a USB or Serial (RS232) cable ? motorola gm360 programming software
Check Windows Device Manager to ensure your USB-to-Serial driver is correctly installed and configured. Verify that the COM port number matches the setting inside the Motorola CPS software. "Codeplug Version Not Supported" or "Cannot Read Block" The GM360 utilizes the microphone jack on the
Software alone is useless without the correct interface. The GM360 uses a proprietary 16-pin accessory connector on the rear of the radio. You have two options: Ensure you are using the correct regional software variants
: Set to CSQ (Carrier Squelch), TPL (PL Tone/CTCSS), or DPL (Digital Tone/DCS) depending on your repeater or network requirements.
Navigate to the "Conventional Personality" folder in the left-hand menu tree. This is where you input your specific frequencies.
The GM360 utilizes the microphone jack on the front panel for programming data input/output.
The GM360 is an EMEA (Europe, Middle East, Africa) market radio. Trying to read it with an American (AAM) or Asian (AZM) version of the Professional Series CPS will result in an error. Ensure you are using the correct regional software variants. If you are setting this up for the first time, tell me: What operating system is your computer running? Do you already have a USB or Serial (RS232) cable ?
Check Windows Device Manager to ensure your USB-to-Serial driver is correctly installed and configured. Verify that the COM port number matches the setting inside the Motorola CPS software. "Codeplug Version Not Supported" or "Cannot Read Block"
Software alone is useless without the correct interface. The GM360 uses a proprietary 16-pin accessory connector on the rear of the radio. You have two options:
: Set to CSQ (Carrier Squelch), TPL (PL Tone/CTCSS), or DPL (Digital Tone/DCS) depending on your repeater or network requirements.
Navigate to the "Conventional Personality" folder in the left-hand menu tree. This is where you input your specific frequencies.
