: The manual emphasized that you must connect the water supply and turn it on

Familiarize yourself with the core parts of the Jobmate 1500 before operation.

To store the unit, remove all workpieces and swivel pegs. Wind the jaws fully closed. Pull the release tabs on the leg hinges and collapse the legs inward toward the frame. The workstation can now be hung on a wall hook or slid into a narrow closet space. Maintenance and Care

Position the two MDF wooden boards onto the top sliding brackets. The board with the printed grid lines and measurement scales must be installed at the front. Thread the mounting bolts from underneath the brackets into the pre-installed nuts in the wood, then tighten them securely with a wrench. 4. Final Alignment Check

Check if the air cooling vents are blocked by your hand or debris.

The Jobmate 1500 uses a collet system to lock accessories into place. Follow these steps to change bits safely.