Autocraft Battery Charger Ac-60cr Manual Access

To avoid sparks near the battery terminal, always connect the charger clamps before plugging the AC power cord into the wall. Conversely, unplug the AC cord before removing the clamps.

If your vehicle’s battery is completely dead and you need to start the car immediately, use the 200-amp engine start mode. autocraft battery charger ac-60cr manual

: Place the battery in a highly ventilated dedicated workspace. Confirm the charger timer is set to OFF and the AC cord is unplugged. To avoid sparks near the battery terminal, always

The Autocraft AC-60CR is built for handling standard 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries. : Place the battery in a highly ventilated

Autocraft battery chargers were commonly sold through AutoZone (a U.S. auto parts retailer). You can contact AutoZone customer support or check their website for archived product manuals.

If the hum is excessively loud and accompanied by a rapid circuit breaker trip, check for a reverse polarity connection (clamps reversed) or a shorted cell inside the battery. The battery gets excessively hot or bubbles violently.